watchman -> ssm

Signed-off-by: fbt <fbt@fleshless.org>

init.d/acpid

@@ -1,5 +1,5 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
-#service_respawn='true'
+service_respawn='true'
 service_command='/usr/bin/acpid'
 service_args=( -f )

init.d/agetty

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 service_respawn='true'
 service_command='/usr/bin/agetty'

init.d/alsa

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_command='/usr/bin/alsactl'

init.d/atd

@@ -1,5 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 service_respawn=true
-service_command='/usr/bin/atd'
-service_args=( -f )
+service_command=( /usr/bin/atd -f )

init.d/binfmt-register

@@ -0,0 +1,18 @@
+#!/usr/bin/watchman
+
+service_type=oneshot
+service_command=( /usr/bin/true )
+
+pre_start() {
+	echo '1' > /proc/sys/fs/binfmt_misc/status || return 1
+
+	if [[ -d /etc/binfmt.d ]]; then
+		for i in /etc/binfmt.d/*; do
+			cat "$i" > /proc/sys/fs/binfmt_misc/register || return 1
+		done
+	fi
+}
+
+pre_stop() {
+	echo '-1' > /proc/sys/fs/binfmt_misc/status || return 1
+}

init.d/bitlbee

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 # This script is intended for Daemon mode.
 # Modify it for your setup.
 

init.d/cgmanager

@@ -0,0 +1,3 @@
+#!/usr/bin/env ssm
+
+service_command='/usr/bin/cgmanager'

init.d/chef-client

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn=true
 service_command='/usr/bin/chef-client'

init.d/chrony

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_command='/usr/bin/chronyd'

init.d/cjdroute

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 # Two warnings:
 # 1) This script uses a script to run cjdroute and feed it
 #	 the config. It can be found in the main cjdns repo:
@@ -10,54 +10,19 @@
 
 unset reload
 
-#service_respawn=true
+service_respawn=true
 service_command='/usr/bin/run-cjdroute'
 cjdroute_admin_port='11234'
 
 cjdroute.check_tun_module() {
 	[[ -e '/dev/net/tun' ]] || {
 		modprobe tun || {
-			watchman.err "Could not load module tun!"
+			printf 'Could not load module tun!\n'
 			return 1
 		}
 	}
 }
 
-start() {
-	if cjdroute.check_tun_module; then
-		watchman.start
-	fi
-}
-
-get_control_pid() {
-	lsof -i :"$cjdroute_admin_port" | tail -1 | cut -d ' ' -f 2
-}
-
-status() {
-	# Check the actual cjdroute process and not the watchdog
-	cjdroute_control_pid=$( get_control_pid )
-
-	counter=0
-	until kill -0 "$cjdroute_control_pid"; do
-		cjdroute_control_pid=$( get_control_pid )
-		(( counter >= 5 )) && {
-			watchman.msg "cjdroute is down"
-			return 1
-		}
-		(( counter++ ))
-		sleep 1
-	done
-
-	watchman.msg "cjdroute is running ($cjdroute_control_pid)"
-}
-
-stop() {
-	[[ "$service_respawn" == 'true' ]] && { watchman.stop; } # stopping the watchdog
-
-	# Stopping the actual s-o-b daemon that won't die properly.
-	cjdroute_control_pid=$( get_control_pid )
-	watchman.pid_check "$cjdroute_control_pid" && {
-		kill "$cjdroute_control_pid"
-		watchman.pid_wait "$cjdroute_control_pid"
-	}
+pre_start() {
+	cjdroute.check_tun_module
 }

init.d/connmand

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 # Author: Alad Wenter
 
 depends dbus || return 1

init.d/cronie

@@ -0,0 +1,4 @@
+#!/usr/bin/env ssm
+
+service_command='/bin/crond'
+service_args=( -n )

init.d/cupsd

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_command='/usr/bin/cupsd'

init.d/dbus

@@ -1,15 +1,10 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn=true
 service_command='/usr/bin/dbus-daemon'
 service_args=( --system --nofork )
 service_tmpfiles=( '/run/dbus:dir' )
 
-start_pre() {
+pre_start() {
 	/usr/bin/dbus-uuidgen --ensure=/etc/machine-id
 }
-
-start() {
-	start_pre
-	watchman.start
-}

init.d/devfs-links

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 # This is a script to set up the links in /dev in absence of e?(u|s?m)dev.
 
 service_type='oneshot'

init.d/dhcpcd

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 # dhcp client daemon initscript
 
 #service_respawn=true

init.d/dnscrypt

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 # soft depend, OR return 1 for hard depend
 depends dnscrypt-backup

init.d/dnscrypt-backup

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_command='/usr/bin/dnscrypt-proxy'

init.d/docker

@@ -1,15 +1,12 @@
-#!/usr/bin/env watchman
-
-docker_dir='/home/docker'
+#!/usr/bin/env ssm
 
 #service_respawn='true'
-service_command='/usr/bin/docker'
-service_args=( -g "$docker_dir" -d )
+service_command=( '/usr/bin/dockerd' -s overlay2 )
 
 update() {
-	watchman.stop && {
+	stop && {
 		wget "https://get.docker.io/builds/Linux/x86_64/docker-latest" -O "$service_command"
 	}
 
-	watchman.start
+	start
 }

init.d/dropbear

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 service_respawn=true
 service_command='/usr/bin/dropbear'

init.d/eudev

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_command='/usr/bin/udevd'
@@ -6,12 +6,12 @@ service_command='/usr/bin/udevd'
 cfg_udev_settle_timeout="${cfg_udev_settle_timeout:-60}"
 
 udev.populate_dev() {
-	watchman.msg "Populating /dev with udev..."
+	printf 'Populating /dev with udev...\n'
 	udevadm trigger --type=subsystems --action=add
 	udevadm trigger --type=devices --action=add
 
-	watchman.msg "Waiting for uevents..."
-	udevadm settle --timeout=${cfg_udev_settle_timeout}
+	printf 'Waiting for uevents...\n'
+	udevadm settle "--timeout=${cfg_udev_settle_timeout}"
 	udevadm control --property=do_not_run_plug_service=
 }
 

init.d/fcgiwrap

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 # The configuration is in conf.d.
 
 #service_respawn='true'

init.d/fsck

@@ -1,14 +1,19 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 service_type='oneshot'
+service_command=( /usr/bin/fsck -A -C -p )
+
+pre_start() {
+	printf 'Remounting / as read-only...\n'
+	mount / -o remount,ro
+}
 
 start() {
-	watchman.msg "Remounting / as read-only..."
-	mount / -o remount,ro
+	printf 'Checking filesystems...\n'
+	super_start
+}
 
-	watchman.msg "Checking filesystems..."
-	/usr/bin/fsck -A -C -p
-
-	watchman.msg "Remounting / as read-write..."
+post_start() {
+	printf 'Remounting / as read-write...\n'
 	mount / -o remount,rw
 }

init.d/haproxy

@@ -0,0 +1,5 @@
+#!/usr/bin/env ssm
+
+#service_respawn=true
+service_command='/usr/bin/haproxy'
+service_args=( -db -f /etc/haproxy/haproxy.cfg )

init.d/haveged

@@ -0,0 +1,4 @@
+#!/usr/bin/env ssm
+
+service_command=/usr/bin/haveged
+service_args=( -F -w 1024 -v 1 )

init.d/hostname

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 # Get hostname from /etc/hostname
 if [[ -e "/etc/hostname" ]]; then

init.d/hwdetect

@@ -1,15 +1,12 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 service_type='oneshot'
+service_command=( /usr/bin/true )
 
-start() {
-	watchman.msg "Running module autodetect..."
-	watchman.start
-}
+pre_start() {
+	printf '(${service_name}) Running module autodetect...\n'
 
-spawn() {
-	# The Alpine Linux hwdetect script runs this twice.
-	# Apparently to make sure we get devices that appear after loading a module on the first run.
+	# The Alpine Linux hwdetect script runs this twice. Apparently to make sure we get devices that appear after loading a module on the first run.
 	find /sys -name modalias -type f -print0 | xargs -0 sort -u | xargs modprobe -b -a 2>/dev/null
 	find /sys -name modalias -type f -print0 | xargs -0 sort -u | xargs modprobe -b -a 2>/dev/null
 

init.d/iptables

@@ -1,13 +1,12 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 service_type='oneshot'
-
 cfg_ip4dump='/etc/iptables/ip4.rules'
 cfg_ip6dump='/etc/iptables/ip6.rules'
 
-spawn() {
-	watchman.msg "Restoring netfilter rules..."
+service_command=( /usr/bin/true )
 
+start() {
 	[[ -f "$cfg_ip4dump" ]] && {
 		iptables-restore -t < "$cfg_ip4dump" || return 1
 		iptables-restore < "$cfg_ip4dump"
@@ -17,20 +16,22 @@ spawn() {
 		ip6tables-restore -t < "$cfg_ip6dump" || return 1
 		ip6tables-restore < "$cfg_ip6dump"
 	}
+
+	super_start
 }
 
 stop() {
-	watchman.msg "Flushing netfilter rules..."
-
 	iptables-save | sed -re 's/(:[A-Z]+\s+)[A-Z]+/\1ACCEPT/g' -e '/-.+/d' | iptables-restore
 	ip6tables-save | sed -re 's/(:[A-Z]+\s+)[A-Z]+/\1ACCEPT/g' -e '/-.+/d' | ip6tables-restore
 
 	for i in $(iptables-save | grep -E '^\*'); do iptables -t "${i//\*/}" -X; done
 	for i in $(ip6tables-save | grep -E '^\*'); do ip6tables -t "${i//\*/}" -X; done
+
+	super_stop
 }
 
 save() {
-	watchman.msg "Saving netfilter rules..."
+	printf 'Saving rules.\n'
 	/usr/bin/iptables-save > "$cfg_ip4dump";
 	/usr/bin/ip6tables-save > "$cfg_ip6dump";
 }

init.d/isc-dhcpd

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 # dhcp client daemon initscript
 
 #service_respawn=true

init.d/kmscon

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 tty="${service_name##*-}"
 

init.d/libvirtd

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_command='/usr/bin/libvirtd'

init.d/lo.iface

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 cfg_iface="${service_name%%.*}"
 
@@ -6,7 +6,7 @@ service_type='oneshot'
 service_command='/usr/bin/ip'
 service_args=( link set "$cfg_iface" up)
 
-wait_for_iface() {
+ready() {
 	local iface="$1" timer='0' timeout='6'
 
 	until [[ "$(ip link show $iface up)" ]]; do
@@ -15,18 +15,7 @@ wait_for_iface() {
 	done
 }
 
-start() {
-	watchman.msg "Activating the $cfg_iface interface..."
-	watchman.start
-
-	wait_for_iface || {
-		echo "Interface $cfg_iface failed to come up!"
-		return 1
-	}
-}
-
-stop() {
-	watchman.msg "Deactivating the $cfg_iface interface..."
+pre_stop() {
 	ip link set "${cfg_iface}" down
-	watchman.stop
+	super_stop
 }

init.d/mariadb

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_workdir='/usr'

init.d/mdev

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 service_type='oneshot'
 service_command='/usr/bin/mdev'

init.d/memcached

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn=true
 service_command='/usr/bin/memcached'

init.d/motd

@@ -0,0 +1,4 @@
+#!/usr/bin/env ssm
+
+service_type='oneshot'
+service_command=( /usr/local/bin/update-motd )

init.d/mount

@@ -1,11 +1,12 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 service_type='oneshot'
+service_command=( /usr/bin/mount -a )
 
-spawn() {
+pre_start() {
 	[[ -w / ]] || { mount -o remount,rw /; }
-	mount -a
-	swapon -a
 }
 
-unset stop
+post_start() {
+	swapon -a
+}

init.d/mpd

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn=true
 service_command='/usr/bin/mpd'

init.d/network

@@ -0,0 +1,10 @@
+#!/usr/bin/env ssm
+
+service_type='oneshot'
+service_command=( /usr/bin/znet -d up )
+
+ifaces=( 'eth0' 'warp' )
+
+pre_stop() {
+	"$service_command" "${service_args[@]}" down
+}

init.d/ngetty

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 service_respawn='true'
 service_command='/usr/bin/ngetty'

init.d/nginx

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 # For respawn to work, set 'daemon no' in nginx.conf
 #service_respawn='true'
@@ -11,15 +11,12 @@ conftest() {
 	nginx.test_config
 }
 
-reload() {
-	if nginx.test_config -q; then
-		watchman.reload
-	else
-		watchman.err "Nginx config test failed, not reloading."
-		return 1
-	fi
+pre_reload() {
+	nginx.test_config || {
+		printf 'Config test failed, not reloading.\n'
+	}
 }
 
 upgrade() {
-	watchman.msg "This script has no zero-downtime upgrade support for nginx."
+	printf 'This script has no zero-downtime upgrade support for nginx.\n'
 }

init.d/nrpe

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 cfg_nrpe_config='/etc/nrpe/nrpe.cfg'
 

init.d/ntp

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_command='/usr/bin/ntpd'

init.d/oidentd

@@ -1,4 +1,4 @@
-#!/usr/bin/watchman
+#!/usr/bin/env ssm
 
 service_command='/usr/bin/oidentd'
 service_args=( -i )

init.d/openntpd

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_command='/usr/bin/ntpd'

init.d/openvpn

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 cfg_ovpn_instance="${service_name##*-}"
 

init.d/openvpn-server

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 service_respawn='true'
 service_command="/usr/sbin/openvpn"

init.d/pamusb

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 service_type='oneshot'
 service_command='/usr/bin/mkdir'

init.d/php-fpm

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_command='/usr/bin/php-fpm'

init.d/preload

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_command='/usr/bin/preload'

init.d/privoxy

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 privoxy_username='privoxy'
 privoxy_configfile='/etc/privoxy/config'
@@ -7,16 +7,6 @@ privoxy_configfile='/etc/privoxy/config'
 service_command='/usr/bin/privoxy'
 service_args=( --no-daemon --user "$privoxy_username" "$privoxy_configfile" )
 
-privoxy::configtest() {
+pre_restart() {
 	"$service_command" --config-test "${service_args[@]}"
 }
-
-restart() {
-	privoxy::configtest || {
-		watchman.err "Config test failed, not restarting!"
-		return 1
-	}
-	
-	watchman.stop
-	watchman.start
-}

init.d/prosody

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 _prosodyctl='/usr/bin/prosodyctl'
 

init.d/rc.local

@@ -1,12 +1,6 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 service_type='oneshot'
 service_command="/etc/rc.local"
 
-unset stop
-
-start() {
-	[[ -f "/etc/rc.local" ]] && {
-		watchman.start
-	}
-}
+pre_start() [[ -f "/etc/rc.local" ]]

init.d/rsyslogd

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 # Author: Alad Wenter
 
 #service_respawn=true

init.d/scron

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_command='/usr/bin/crond'

init.d/sdhcp

@@ -0,0 +1,7 @@
+#!/usr/bin/env ssm
+# dhcp client daemon initscript
+
+service_style='oneshot'
+service_command='/usr/bin/sdhcp'
+
+stop() { killall sdhcp; }

init.d/smdev

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 service_type='oneshot'
 service_command='/usr/bin/smdev'

init.d/sshd

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 cfg_sshd_cfgdir='/etc/ssh'
 
@@ -6,6 +6,10 @@ service_respawn=true
 service_command='/usr/bin/sshd'
 service_args=( -D -f "$cfg_sshd_cfgdir/sshd_config" )
 
+depends_ready=( znet )
+
 pre_start() {
-	[[ -e "/etc/ssh/ssh_host_key" ]] || { ssh-keygen -A; }
+	if ! [[ -e "/etc/ssh/ssh_host_key" ]]; then
+		ssh-keygen -A
+	fi
 }

init.d/sysctl

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 unset reload
 
 service_type='oneshot'
@@ -13,11 +13,3 @@ pre_start() {
 
 	service_args=( -p "${sysctl_config_files[@]}" )
 }
-
-start() {
-	if ! [[ "$sysctl_config_files" ]]; then
-		return 0
-	fi
-
-	watchman.start
-}

init.d/syslog-ng

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn=true
 service_command='/usr/bin/syslog-ng'

init.d/systemd-udevd

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_command='/usr/lib/systemd/systemd-udevd'
@@ -6,11 +6,11 @@ service_command='/usr/lib/systemd/systemd-udevd'
 cfg_udev_settle_timeout="${cfg_udev_settle_timeout:-60}"
 
 udev.populate_dev() {
-	watchman.msg "Populating /dev with udev..."
+	prinft 'Populating /dev with udev...\n'
 	udevadm trigger --type=subsystems --action=add
 	udevadm trigger --type=devices --action=add
 
-	watchman.msg "Waiting for uevents..."
+	printf 'Waiting for uevents...\n'
 	udevadm settle --timeout=${cfg_udev_settle_timeout}
 	udevadm control --property=do_not_run_plug_service=
 }

init.d/teamviewerd

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn=true
 service_pidfile='/run/teamviewerd.pid'

init.d/tinc

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 instance="${service_name##*-}"
 

init.d/unbound

@@ -1,18 +1,11 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
-service_command='/usr/bin/unbound'
-service_args=( -d )
+service_command=( /usr/bin/unbound -d )
 
-conftest() {
-	unbound-checkconf
-}
-
-reload() {
-	if conftest; then
-		watchman.reload
-	else
-		watchman.err "Configtest failed, not reloading."
+pre_reload() {
+	unbound-checkconf || {
+		printf 'Configtest failed, not reloading.\n'
 		return 1
-	fi
+	}
 }

init.d/userrc

@@ -0,0 +1,4 @@
+#!/usr/bin/env ssm
+
+service_type='oneshot'
+service_command='/usr/bin/userrc'

init.d/vdevd

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_command='/usr/bin/vdevd'

init.d/vixie-cron

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn='true'
 service_command='/usr/bin/crond'

init.d/wpa_supplicant

@@ -0,0 +1,5 @@
+#!/usr/bin/env ssm
+
+service_command='/usr/bin/wpa_supplicant'
+service_config='/etc/wpa_supplicant/wpa_supplicant.conf'
+service_args=( -i "${service_name##*-}" -c "$service_config" )

init.d/xinetd

@@ -1,4 +1,4 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 #service_respawn=true
 service_command='/usr/bin/xinetd'

init.d/znet

@@ -1,10 +1,10 @@
-#!/usr/bin/env watchman
+#!/usr/bin/env ssm
 
 service_type='oneshot'
-service_command='/usr/bin/znet'
-service_args=( -d )
+service_command=( /usr/bin/znet -d up )
 
-stop() {
-	"$service_command" $service_args down
-	watchman.stop
+ifaces=( 'eth0' 'warp' )
+
+pre_stop() {
+	"$service_command" "${service_args[@]}" down
 }

init.d/zt

@@ -0,0 +1,3 @@
+#!/usr/bin/env ssm
+
+service_command="/usr/bin/zerotier-one"