fbt/sbase
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
acca463813
sbase/README

131 lines
3.0 KiB
Plaintext
Raw Normal View History

Add initial README
2014-02-12 14:34:09 +00:00
sbase - suckless unix tools
===========================
sbase is a collection of unix tools that are inherently portable
across UNIX and UNIX-like systems.
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
The following tools are implemented:
Add an easier to edit "table" of tools in README We need to go through the tools and update this table to reflect current state.
2014-11-20 23:01:56 +00:00
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
'#' -> UTF-8 support, '=' -> Implicit UTF-8 support, '*' -> Finished,
'|' -> Audited, 'o' -> POSIX 2013 compliant, 'x' -> Non-POSIX,
'()' -> Petty flag
Note in the README that find(1) and sed(1) are lacking manpages
2015-08-04 10:59:04 +00:00
UTILITY MISSING
------- -------
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
=*|o basename .
=*|o cal .
=*|o cat .
=*|o chgrp .
=*|o chmod .
=*|o chown .
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
=*|x chroot .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
=*|o cksum .
=*|o cmp .
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
#*|x cols .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
=*|o comm .
=*|o cp (-i)
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
=*|x cron .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
#*|o cut .
=*|o date .
=*|o dirname .
=*|o du .
=*|o echo .
=*|o env .
#*|o expand .
#*|o expr .
=*|o false .
Mark manpages as done in the README for find(1) and sed(1)
2015-08-04 18:42:55 +00:00
= find .
Add flock entry in README
2015-10-07 09:24:46 +00:00
=* x flock .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
#*|o fold .
Add getconf(1) The logic is simple, it's just a pain in the ass to fill the data-structures. Some lines had to be commented out, as glibc/musl apparently have not fully implemented the mandatory variables for the 2013 corrigendum of POSIX 2008. Also added a manpage and the necessary entries in README. I also removed it from the TODO.
2015-09-30 22:59:40 +00:00
=* o getconf (-v)
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
=* o grep .
=*|o head .
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
=*|x hostname .
Add join(1)
2015-04-20 10:23:20 +00:00
=* o join .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
=*|o kill .
=*|o link .
=*|o ln .
=*|o logger .
=*|o logname .
#* o ls (-C, -k, -m, -p, -s, -x)
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
=*|x md5sum .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
=*|o mkdir .
=*|o mkfifo .
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
=*|x mktemp .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
=*|o mv (-i)
=*|o nice .
#*|o nl .
=*|o nohup .
Implement od(1) v-flag If this flag is not given, od(1) automatically replaces duplicate adjacent lines with an '*' for each reoccurence. If this flag is set, thus, no such filtering occurs. In this case this would mean having to somehow keep the last printed line in some backbuffer, building the next line and then doing the necessary comparisons. This basically means that we duplicate the functionality provided with uniq(1). So instead of $ od -t a > dump you'd rather do $ od -t a | uniq -f 1 -c > dump Skipping the first field is necessary, as the addresses obviously differ. Now, I was thinking hard why this flag even exists. If POSIX mandated to add the address before the asterisk, so we know the offset of duplicate occurrences, this would make sense. However, this is not the case. Using uniq(1) also gives nicer output: ~ $ echo "111111111111111111111111111111111111111111111111" | od -t a -v | uniq -f 1 -c 3 0000000 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0000060 nl 1 0000061 in comparison to $ echo "111111111111111111111111111111111111111111111111" | od -t a 0000000 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 * 0000060 nl 0000061 Before working on od(1), I didn't even know it would filter out duplicate adjacent lines like that. This is also a matter of predictability. Concluding, the v-flag is implicitly set and users urged to just use the existing tools provided by the system. I don't think we would break scripts either. Firstly, it's rather unlikely to have duplicate lines exactly matching the line-length of od(1). Secondly, even if a script did that specifically, in the worst case there would be a counting error or something. Given od(1) is mostly used interactively, we can safely assume this feature is for the benefit of the users. Ditch this legacy POSIX crap! Please enter the commit message for your changes. Lines starting
2015-09-30 10:54:24 +00:00
od -t
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
#*|o paste .
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
=*|x printenv .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
#*|o printf .
=*|o pwd .
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
=*|x readlink .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
=*|o renice .
=*|o rm (-i)
=*|o rmdir .
Mark manpages as done in the README for find(1) and sed(1)
2015-08-04 18:42:55 +00:00
# sed .
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
=*|x seq .
=*|x setsid .
=*|x sha1sum .
=*|x sha256sum .
=*|x sha512sum .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
=*|o sleep .
Audit sort(1) and mark it as finished 1) Remove the function prototypes. No need for them, as the functions are ordered. 2) Add fieldseplen, so the length of the field-separator is not calculated nearly each time skipcolumn() is called. 3) rename next_col to skip_to_next_col so the purpose is clear, also reorder the conditional accordingly. 4) Put parentheses around certain ternary expressions. 5) BUGFIX: Don't just exit() in check(), but make it return something, so we can cleanly fshut() everything. 6) OFF-POSIX: Posix for no apparent reason does not allow more than one file when the -c or -C flags are given. This can be problematic when you want to check multiple files. With the change 5), rewriting check() to return a value, I went off-posix after discussing this with Dimitris to just allow arbitrary numbers of files. Obviously, this does not break scripts and is convenient for everybody who wants to quickly check a big amount of files. As soon as 1 file is "unsorted", the return value is 1, as expected. For convenience reasons, check()'s warning now includes the filename. 7) BUGFIX: Set ret to 2 instead of 1 when the fshut(fp, *argv) fails. 8) BUGFIX: Don't forget to fshut stderr at the end. This would improperly return 1 in the following case: $ sort -c unsorted_file 2> /dev/full 9) Other style changes, line length, empty line before return.
2015-08-04 10:45:59 +00:00
#*|o sort (-d, -f, -i)
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
=*|o split .
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
=*|x sponge .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
#*|o strings .
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
=*|x sync .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
=*|o tail .
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
=*|x tar .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
=*|o tee .
=*|o test .
Add TFTP client as specified by RFC 1350 This client does not support the netascii mode. The default mode is octet/binary and should be sufficient. One thing left to do is to check the source port of the server to make sure it doesn't change. If it does, we should ignore the packet and send an error back without disturbing an existing transfer.
2015-08-14 11:58:02 +00:00
=* x tftp .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
=*|o time .
=*|o touch .
#*|o tr .
=*|o true .
=*|o tty .
=*|o uname .
#*|o unexpand .
=*|o uniq .
=*|o unlink .
=*|o uudecode .
=*|o uuencode .
#*|o wc .
Refactor and audit which(1) Use the *at functions instead of building paths manually. We do still have path-building in recurse() and other areas, but the long-term goal is to rid most interfaces of that for practical and security reasons. In this case, it's more or less trivial. Also, refactor the manpage to be more consistent with the others. BUGFIX: Return exit status 3 on error.
2015-04-27 18:01:30 +00:00
=*|x which .
POSIX 2013 audit Mostly manpage-shuffling according to the changes in the corrigendum, wording changes and more idiomatic expressions. All this is finished up by marking the POSIX 2013 conformant tools with .St -p1003.1-2013 which is not available in older mandoc builds or nroff, but which reflects what we actually did, so who cares? This is a huge step and it's not far until we can release sbase 0.1.
2015-03-27 16:22:48 +00:00
=*|o xargs (-p)
Prepare POSIX 2013 audit I can't believe we've come this far! The idea is to look at the 2013 POSIX corrigendum for each tool and deep-test features before making the first 0.1 release. To keep the noise low, I'll do this in batches, not on a per-tool- basis (as many of these are trivial to test). In the meantime, I'll also think of a fitting STANDARDS section for the non-POSIX tools. Now that the audits are pretty much done, I can also have a more relaxed view on standards compliance instead of having to dig through some uncleaned mess. To mark this "new beginning", the README has gotten a liftover. The POSIX 2008-column was more or less useless and as I expect the checks to go along pretty quickly, I "reset" the compliance state of all but the non-POSIX tools and will then go along and check every single one of them in the next few days. Apart from the few missing flags and audits, sbase should then be ready to hit the world with the first release after 4 years of work.
2015-03-23 15:22:00 +00:00
=*|x yes .
Add an easier to edit "table" of tools in README We need to go through the tools and update this table to reflect current state.
2014-11-20 23:01:56 +00:00
Minor fix for README
2014-02-12 18:39:13 +00:00
The complement of sbase is ubase[1] which is Linux-specific and
Add initial README
2014-02-12 14:34:09 +00:00
provides all the non-portable tools. Together they are intended to
form a base system similar to busybox but much smaller and suckless.
Building
--------
To build sbase, simply type make. You may have to fiddle with
config.mk depending on your system.
You can also build sbase-box, which generates a single binary
containing all the required tools. You can then symlink the
README: document sbase-box-install rule
2015-02-28 14:40:16 +00:00
individual tools to sbase-box or run: make sbase-box-install
Add initial README
2014-02-12 14:34:09 +00:00
Ideally you will want to statically link sbase. If you are on Linux
we recommend using musl-libc[2].
Portability
-----------
sbase has been compiled on a variety of different operating systems,
including Linux, *BSD, OSX, Haiku, Solaris, SCO OpenServer and others.
Various combinations of operating systems and architectures have also
been built.
You can build sbase with gcc, clang, tcc, nwcc and pcc.
[1] http://git.suckless.org/ubase/
[2] http://www.musl-libc.org/
Reference in New Issue Copy Permalink