fix mandoc warnings

- sort references in SEE ALSO section to section number, name.
- cols.1: proper order of sections.
- wrap lines to max 79 column length.

chgrp.1

@@ -21,8 +21,8 @@ flag is specified, this process is recursively applied to
 everything in
 .Ar file .
 .Sh SEE ALSO
-.Xr chown 1 ,
-.Xr chown 2 ,
 .Xr chmod 1 ,
+.Xr chown 1 ,
 .Xr chmod 2 ,
+.Xr chown 2 ,
 .Xr getgrnam 3

cols.1

@@ -10,21 +10,29 @@
 .Op Ar file ...
 .Sh DESCRIPTION
 .Nm
-reads each file in sequence and writes them to stdout,
+reads each file in sequence and writes them to stdout, in as many vertical
-in as many vertical columns as will fit in
+columns as will fit in
 .Ar chars
-character columns.
+character columns. If no
-If no file is given, cols reads from stdin.
+.Ar file
+is given,
+.Nm
+reads from stdin.
 .Sh OPTIONS
 .Bl -tag -width xxxxxxxx
 .It Fl c Ar chars
 Specifies the maximum number of character columns to use
 (unless the input contains lines longer than
 .Ar chars
-characters).  By default cols tries to figure out the width
+characters). By default cols tries to figure out the width of the output
-of the output device, if that fails it defaults to 65
+device, if that fails it defaults to 65 chars.
-chars.
 .El
+.Sh HISTORY
+.Nm
+is similar to the mc(1) command on Plan 9. It was renamed to
+.Nm
+to avoid the name collision with the popular file manager
+Midnight Commander.
 .Sh BUGS
 This implementation of
 .Nm
@@ -33,9 +41,3 @@ and thus mishandles TAB characters (among others).
 .Pp
 .Nm
 currently mangles files which contain embedded NULs.
-.Sh HISTORY
-.Nm
-is similar to the mc(1) command on Plan 9.  It was renamed to
-.Nm
-to avoid the name collision with the popular file manager
-Midnight Commander.

cp.1

@@ -34,8 +34,8 @@ if an existing destination file cannot be opened, remove it and try again.
 .It Fl R
 equivalent to -r.
 .It Fl r
-copies directories recursively.  If this flag is not specified, directories are
+copies directories recursively. If this flag is not specified, directories
-not copied.
+are not copied.
 .It Fl v
 print names of source and destination per file to stdout. In the format:
 "source \-> destination".

cut.1

@@ -67,5 +67,5 @@ utility is compliant with the
 .St -p1003.1-2008
 specification.
 .Pp
-The possibility of separating numbers and ranges with a space
+The possibility of separating numbers and ranges with a space and specifying
-and specifying multibyte delimiters of arbitrary length is an extension to that specification.
+multibyte delimiters of arbitrary length is an extension to that specification.

du.1

@@ -15,9 +15,11 @@
 .Nm
 displays the file system block usage for each
 .Ar file
-argument and for each directory in the file hierarchy rooted in directory argument.
+argument and for each directory in the file hierarchy rooted in directory
-If no file is specified, the block usage of the hierarchy rooted in the current
+argument. If no
-directory is displayed.
+.Ar file
+is specified, the block usage of the hierarchy rooted in the current directory
+is displayed.
 .Sh OPTIONS
 .Bl -tag -width Ds
 .It Fl a

expand.1

@@ -37,8 +37,8 @@ The default
 is "8".
 .El
 .Sh SEE ALSO
-.Xr unexpand 1 ,
+.Xr fold 1 ,
-.Xr fold 1
+.Xr unexpand 1
 .Sh STANDARDS
 The
 .Nm

expr.1

@@ -76,7 +76,8 @@ against
 is anchored with an implicit '^'.
 .Pp
 You can't directly match the empty string, since zero matched characters
-resolve equally to a failed match. To work around this limitation, use "expr X'' : 'X$' instead of "expr '' : '$'"
+resolve equally to a failed match. To work around this limitation, use
+"expr X'' : 'X$' instead of "expr '' : '$'"
 .El
 .Sh EXIT STATUS
 .Bl -tag -width Ds

grep.1

@@ -25,8 +25,8 @@ reads from stdin.
 .It Fl E
 Match using extended regex.
 .It Fl F
-Match using fixed strings.  Treat each pattern specified as a string instead of a regular
+Match using fixed strings. Treat each pattern specified as a string instead of
-expression.
+a regular expression.
 .It Fl H
 Prefix each matching line with its filename in the output. This is the
 default when there is more than one file specified.
@@ -54,7 +54,8 @@ Prefix each matching line with its line number in the input.
 .It Fl q
 Print nothing, only return status.
 .It Fl s
-Suppress the error messages ordinarily written for nonexistent or unreadable files.
+Suppress the error messages ordinarily written for nonexistent or unreadable
+files.
 .It Fl v
 Select lines which do
 .Sy not
@@ -62,8 +63,9 @@ match the pattern.
 .It Fl w
 The expression is searched for as a word (as if surrounded by '\<' and '\>').
 .It Fl x
-Consider only input lines that use all characters in the line excluding the terminating <newline> to
+Consider only input lines that use all characters in the line excluding the
-match an entire fixed string or regular expression to be matching lines.
+terminating <newline> to match an entire fixed string or regular expression to
+be matching lines.
 .El
 .Sh EXIT STATUS
 .Bl -tag -width Ds
@@ -75,8 +77,8 @@ No lines were matched.
 An error occurred.
 .El
 .Sh SEE ALSO
-.Xr regex 7 ,
+.Xr sed 1 ,
-.Xr sed 1
+.Xr regex 7
 .Sh STANDARDS
 The
 .Nm

kill.1

@@ -22,9 +22,8 @@ by default sends a TERM signal to the given processes.
 .Sh OPTIONS
 .Bl -tag -width Ds
 .It Fl s Ar signal_name
-A symbolic signal name specifying the signal to be sent instead
+A symbolic signal name specifying the signal to be sent instead of the
-of the default SIGTERM.
+default SIGTERM. Sends the named signal.
-Sends the named signal.
 .It Fl l Op Ar exit_status
 Lists available signals. If an
 .Ar exit_status
@@ -33,8 +32,8 @@ is given, only the corresponding signal name will be printed.
 A symbolic signal name specifying the signal to be sent instead
 of the default SIGTERM.
 .It Fl signal_number
-A non-negative decimal integer specifying the signal to be sent
+A non-negative decimal integer specifying the signal to be sent instead of
-instead of the default SIGTERM.
+the default SIGTERM.
 .El
 .Sh SEE ALSO
 .Xr kill 2 ,

ln.1

@@ -41,8 +41,8 @@ exists, remove it to allow the link.
 .It Fl L | Fl P
 If
 .Ar target
-is a symbolic link, create a hard link to the (referenced file) | (symbolic link itself).
+is a symbolic link, create a hard link to the (referenced file) |
-The former is the default.
+(symbolic link itself). The former is the default.
 .It Fl s
 Create symbolic links instead of hard links.
 Disables

logger.1

@@ -20,8 +20,8 @@ system log module.
 .It Fl i
 Log the process ID of the logger process with each line.
 .It Fl p Ar priority
-Enter the message with the specified priority.  They priority
+Enter the message with the specified priority. They priority has to be
-has to be specified symbolically as
+specified symbolically as
 .Dq facility.level
 pair. The default is
 .Dq user.notice .
@@ -31,12 +31,11 @@ Log the message to standard error, as well as the system log.
 Mark every line in the log with the specified
 .Ar tag .
 .It Ar message
-Write the message to the log; if not specified, standard input
+Write the message to the log; if not specified, standard input is logged.
-is logged.
 .El
 .Sh SEE ALSO
-.Xr syslog 3 ,
+.Xr syslogd 1 ,
-.Xr syslogd 1
+.Xr syslog 3
 .Sh STANDARDS
 The
 .Nm

mktemp.1

@@ -10,11 +10,11 @@
 .Op Ar template
 .Sh DESCRIPTION
 .Nm
-takes the given filename template and overwrites a portion of it
+takes the given filename template and overwrites a portion of it to create a
-to create a unique filename.  The template may be any filename with at least
+unique filename. The template may be any filename with at least six `Xs'
-six `Xs' appended to it.  If no template is specified a default of
+appended to it. If no template is specified a default of `tmp.XXXXXXXXXX' is
-`tmp.XXXXXXXXXX' is used and the tmpdir is set to `/tmp' unless the
+used and the tmpdir is set to `/tmp' unless the TMPDIR envrionment variable
-TMPDIR envrionment variable has been set.
+has been set.
 .Sh OPTIONS
 .Bl -tag -width Ds
 .It Fl d

nice.1

@@ -30,8 +30,8 @@ to
 Default is 10.
 .El
 .Sh SEE ALSO
-.Xr renice 2 ,
+.Xr nice 2 ,
-.Xr nice 2
+.Xr renice 2
 .Sh STANDARDS
 The
 .Nm

nl.1

@@ -14,8 +14,9 @@
 .Nm
 reads lines from the named
 .Ar file
-and writes them to stdout with non-empty lines
+and writes them to stdout with non-empty lines numbered. If no
-numbered.  If no file is given
+.Ar file
+is given
 .Nm
 reads from stdin.
 .Sh OPTIONS

renice.1

@@ -32,8 +32,8 @@ to
 (lowest priority).
 .El
 .Sh SEE ALSO
-.Xr renice 2 ,
+.Xr nice 2 ,
-.Xr nice 2
+.Xr renice 2
 .Sh STANDARDS
 The
 .Nm

rmdir.1

@@ -22,8 +22,8 @@ and its parents in the pathname
 .El
 .Sh SEE ALSO
 .Xr rm 1 ,
-.Xr rmdir 2 ,
 .Xr unlink 1 ,
+.Xr rmdir 2 ,
 .Xr unlink 2
 .Sh STANDARDS
 The

strings.1

@@ -10,7 +10,11 @@
 .Sh DESCRIPTION
 .Nm
 prints the printable character sequences that are at least 6 characters
-long.  If no files are given then it uses stdin.
+long. If no
+.Ar files
+are given,
+.Nm
+reads from stdin.
 .Sh STANDARDS
 .Nm
 mirrors the semantics of Plan9

tail.1

@@ -10,8 +10,11 @@
 .Op Ar file
 .Sh DESCRIPTION
 .Nm
-writes the last 10 lines of the file to stdout.  If no file is given, tail reads
+writes the last 10 lines of the file to stdout. If no
-from stdin.
+.Ar file
+is given,
+.Nm
+reads from stdin.
 .Sh OPTIONS
 .Bl -tag -width Ds
 .It Fl n Ar lines

touch.1

@@ -11,23 +11,21 @@
 .Ar file ...
 .Sh DESCRIPTION
 .Nm
-sets the access and modification times of files to the current time of day.  If the file
+sets the access and modification times of files to the current time of day. If
-doesn't exist, it is created with the default permissions.
+the file doesn't exist, it is created with the default permissions.
 .Sh OPTIONS
 .Bl -tag -width Ds
 .It Fl a
 Set the access time of the file.
 .It Fl c
-Do not create the file it it does not exist.  The exit
+Do not create the file it it does not exist. The exit status is not affected.
-status is not affected.
 .It Fl m
 Change the modification time of the file.
 .It Fl t Ar stamp
 Set the timestamp to be used with
 .Op Fl am .
-The format of the timestamp is simply the number of seconds
+The format of the timestamp is simply the number of seconds since Jan 1, 1970.
-since Jan 1, 1970.  This specification of time does not conform
+This specification of time does not conform to POSIX.
-to POSIX.
 .El
 .Sh SEE ALSO
 .Xr date 1

tr.1

@@ -71,8 +71,8 @@ Input processed successfully.
 An error occurred.
 .El
 .Sh SEE ALSO
-.Xr sed 1 ,
 .Xr awk 1 ,
+.Xr sed 1 ,
 .Xr utf8 7
 .Sh STANDARDS
 The

uuencode.1

@@ -10,10 +10,9 @@
 .Ar name
 .Sh DESCRIPTION
 .Nm
-reads file (or by default, the standard input) and writes an encoded
+reads file (or by default, the standard input) and writes an encoded version
-version to the standard output.  The encoding uses only printing ASCII
+to the standard output. The encoding uses only printing ASCII characters and
-characters and includes the mode of the file and the operand name
+includes the mode of the file and the operand name for use by uudecode.
-for use by uudecode.
 .Sh IMPLEMENTATION NOTES
 This version of uuencode does not currently support the base64
 encoding algorithm.

wc.1

@@ -10,9 +10,13 @@
 .Op Ar file ...
 .Sh DESCRIPTION
 .Nm
-.Pp
 prints the number of lines, words, and bytes in each file. If any flags are
-given, wc will print only the requested information.  If no files are given, wc
+given,
+.Nm
+will print only the requested information. If no
+.Ar files
+are given,
+.Nm
 reads stdin.
 .Sh OPTIONS
 .Bl -tag -width Ds