homedir/.Xresources

@@ -1,6 +1,3 @@
-! Cursor
-Xcursor.theme: Neutral
-
 ! Xft settings ---------------------------------------------------------------
 
 Xft.dpi:        95

homedir/.config/bspwm/bspwmrc

@@ -35,7 +35,7 @@ done
 "$XDG_CONFIG_HOME/bspwm/rules"
 
 # start some services
-services=( sxhkd dunst ssh-agent ufwd{,-private,-scn,-fikus} syncthing mpd )
+services=( sxhkd dunst ssh-agent ufwd{,-private,-scn,-fikus} )
 for s in "${services[@]}"; do
 	if ! service "$s" status; then
 		service "$s" start

homedir/.config/bspwm/rules

@@ -7,6 +7,5 @@ while read -r rule _; do bspc rule -r "$rule"; done < <(bspc rule -l)
 bspc rule -a 'firefox'                  desktop=^2 state=tiled
 bspc rule -a 'steam_app_359320'         desktop=^5
 bspc rule -a 'steam_app_397540'         desktop=^5
-bspc rule -a 'steam_proton'             desktop=^5
 bspc rule -a 'Steam'                    desktop=^8
 bspc rule -a '*'                        state=floating

homedir/.config/bspwm/sxhkdrc

@@ -49,14 +49,16 @@ super + l; l
 super + l; {u,s}
 	ssm lockd stop
 
-# Screenshots
+# simple hotkeys
 Print
 	snap -f
 
 shift + Print
 	snap
 
-# Simple
+control + Print
+	maim -s | xclip -selection clipboard -t image/png
+
 super + {r,p,e,n}
 	dmenu-extras -l 9 {run,pass,emoji,note}
 
@@ -82,10 +84,6 @@ shift + {XF86Tools,XF86Launch5,XF86Launch6,XF86Launch7}
 control + {XF86Tools,XF86Launch5,XF86Launch6,XF86Launch7}
 	~/bin/sndbrd-macro -p {8,9,10,11}
 
-# Music
-super + m; {t, s, n, p}
-	mpc {toggle, stop, next, prev}
-
 # Dunst
 super + d; {space,c,h}
 	dunstctl {close-all,context,history-pop}
@@ -95,5 +93,5 @@ super + s; m
 	pactl set-source-mute jack_in toggle
 
 # Fucking Firefox man
-#control + q
+control + q
-#   /bin/true
+   /bin/true

homedir/.config/moltenbar/rc.yaml

@@ -42,11 +42,10 @@ panels:
           -h
           -p
       date:
-        format: '%A, %Y.%m.%d %H:%M:%S MSK'
+        format: '%A, %Y.%m.%d %H:%M:%S'
-        offset: '+03:00'
       la:
-        warn_value: 14
+        warn_value: 3
-        crit_value: 16
+        crit_value: 4
       www:
         hosts:
           - de-ber-as20647.anchors.atlas.ripe.net
@@ -55,10 +54,12 @@ panels:
       warp:
         hosts:
           - malganis.priv
-          - builder.priv
+          - spike.priv
+          - builder.virt
       xnt:
         hosts:
-          - access1.infra.erty.sh
+          - brilliant.zorg.sh
+          - ruby.zorg.sh
           - access33.eprod.zorg.sh
           - access31.sprod.zorg.sh
       memory:

homedir/.config/ssm/services/lockd

@@ -2,7 +2,7 @@
 # vim: ft=sh
 
 service_respawn = always
-service_command = "$HOME/bin/lockd" i3lock-extra -s -o ~/pics/lock.png -p -- -e -f
+service_command = "$HOME/bin/lockd" i3lock-extra -s -o ~/pics/lock.png -p -g -- -e -f
 
 function pre_start {
 	notify-send 'ssm' "Starting $service_name; press again to lock."

homedir/.config/ssm/services/ssh-agent

@@ -1,3 +1,4 @@
-#!/usr/bin/env ssm
+#!/usr/bin/env watchman
 
-service_command = /usr/bin/ssh-agent -d -a "/run/user/$UID/ssh-auth.sock"
+service_command='/usr/bin/ssh-agent'
+service_args=( -d -a "/run/user/$UID/ssh-auth.sock" )

homedir/.config/ssm/services/ufwd-fikus-scn

@@ -1,12 +0,0 @@
-#!/usr/bin/env ssm
-
-service_tmpfiles=( "$XDG_RUNTIME_DIR/ufwd-fikus-scn:dir" )
-
-#service_respawn='true'
-dirs+=( "$XDG_RUNTIME_DIR/ufwd-fikus-scn" )
-
-service_command = /usr/bin/ufwd -n -c \
-	$(printf -- '-d %s ' "${dirs[@]}") \
-	-- -R -t 'screenshot' -A "Screenshots%3B%20$(date +%Y.%m.%d)"
-
-service_cgroup_cleanup = 1

homedir/.config/ssm/services/ufwd-private

@@ -1,4 +1,4 @@
-#!/usr/bin/env ssm
+#!/usr/bin/env watchman
 
 service_tmpfiles=( "$XDG_RUNTIME_DIR/ufwd-private:dir" )
 

homedir/.config/ssm/services/ufwd-scn

@@ -1,4 +1,4 @@
-#!/usr/bin/env ssm
+#!/usr/bin/env watchman
 
 service_tmpfiles=( "$XDG_RUNTIME_DIR/scn:dir" )
 
@@ -6,8 +6,8 @@ service_tmpfiles=( "$XDG_RUNTIME_DIR/scn:dir" )
 dirs=( $(find /home/fbt/.local/share/Steam/userdata/22500463/760/remote -name 'screenshots') )
 dirs+=( "$XDG_RUNTIME_DIR/scn" )
 
-service_command = /usr/bin/ufwd -n -c \
+service_command = /usr/bin/ufwd -c \
 	$(printf -- '-d %s ' "${dirs[@]}") \
-	-- -R -t 'screenshot' -A "Screenshots; $(date +%Y.%m.%d)"
+	-- -R -t 'screenshot' -A "Screenshots%3B%20$(date +%Y.%m.%d)"
 
 service_cgroup_cleanup = 1

homedir/.config/ssm/ssm.conf

@@ -26,7 +26,7 @@
 #service_stop_signal = 15
 
 # Enable cgroup-related functions
-#cgroups = 1
+cgroups = 1
 
 # Refuse to start the service if its cgroup is not empty
 service_cgroup_exclusive = 1

homedir/.config/zsh.d/modules/config

@@ -44,8 +44,7 @@ set_misc_path \
 	"$HOME/games/bin" \
 	"$HOME/.local/bin" \
 	"$HOME/.nails/bin" \
-	"$HOME/.winepx/bin" \
+	"$HOME/.winepx/bin"
-	"$HOME/.rvm/bin"
 
 # GPG
 GPG_TTY=$(tty)

homedir/.config/zxinit/common

@@ -44,14 +44,12 @@ if [[ -f "$HOME/wallpaper.png" ]]; then
 fi
 
 # Input settings
-setxkbmap -layout "us,ru" \
+setxkbmap -layout "ducky-mini(us),ducky-mini(ru)" \
           -option "lv3:menu_switch,grp:caps_toggle,grp_led:caps,compose:ralt,terminate:ctrl_alt_bksp"
 xmodmap -e 'remove lock = Caps_Lock' \
         -e 'keycode 135 = KP_Insert' \
-        -e 'keycode 49 = Escape asciitilde' \
+        -e 'keycode 49 = Escape asciitilde'
-        -e "pointer = 3 2 1"
+#xmodmap -e "pointer = 3 2 1"
-xinput --set-prop 22 'libinput Accel Speed' -0.92
-#xinput set-button-map 17 3 2 1 4 5 6 7 8 9
 
 # Start a dbus session
 if ! [[ "$DBUS_SESSION_BUS_ADDRESS" ]]; then
@@ -64,8 +62,8 @@ export VDPAU_NVIDIA_NO_OVERLAY=1
 nvidia-settings -l
 nvidia-settings -a InitialPixmapPlacement=2
 
-# Warmer colours
+# Colour temp
-xsct 4500
+xsct 6000
 
 # Custom functions
 services() {

homedir/.ncmpcpp/config

@@ -1,206 +1,4 @@
-##############################################################
+### Colours
-## This is an example configuration file. Copy it to        ##
-## $XDG_CONFIG_HOME/ncmpcpp/config or $HOME/.ncmpcpp/config ##
-## and set up your preferences.                             ##
-##############################################################
-#
-##### directories ######
-##
-## Directory for storing ncmpcpp related files.  Changing it is useful if you
-## want to store everything somewhere else and provide command line setting for
-## alternative location to config file which defines that while launching
-## ncmpcpp.
-##
-#
-#ncmpcpp_directory = ~/.config/ncmpcpp
-#
-##
-## Directory for storing downloaded lyrics. It defaults to ~/.lyrics since other
-## MPD clients (eg. ncmpc) also use that location.
-##
-#
-#lyrics_directory = ~/.lyrics
-#
-##### connection settings #####
-#
-#mpd_host = localhost
-#
-#mpd_port = 6600
-#
-#mpd_connection_timeout = 5
-#
-## Needed for tag editor and file operations to work.
-##
-#mpd_music_dir = ~/music
-#
-#mpd_crossfade_time = 5
-#
-# Exclude pattern for random song action
-# http://www.boost.org/doc/libs/1_46_1/libs/regex/doc/html/boost_regex/syntax/perl_syntax.html
-#random_exclude_pattern = "^(temp|midi_songs).*"
-#
-##### music visualizer #####
-##
-## In order to make music visualizer work with MPD you need to use the fifo
-## output. Its format parameter has to be set to 44100:16:1 for mono
-## visualization or 44100:16:2 for stereo visualization. As an example here is
-## the relevant section for mpd.conf:
-##
-## audio_output {
-##        type            "fifo"
-##        name            "Visualizer feed"
-##        path            "/tmp/mpd.fifo"
-##        format          "44100:16:2"
-## }
-##
-## If the visualization on occasion diverges from the audio output, please set
-## 'buffer_time' parameter of your audio output in mpd.conf to '100000' (100ms)
-## or less to prevent that from happening.
-##
-## Note: If you're using Mopidy, an address of a udpsink gstreamer's output is
-## also accepted. For example, the following section in mopidy.conf:
-##
-## [audio]
-## output = tee name=t ! queue ! autoaudiosink t.
-##        ! queue ! audio/x-raw,rate=44100,channels=2,format=S16LE
-##        ! udpsink host=localhost port=5555
-##
-## will make localhost:5555 available as a source of data for the stereo
-## visualizer.
-##
-#
-#visualizer_data_source = /tmp/mpd.fifo
-#
-##
-## Note: Below parameter is needed for ncmpcpp to determine which output
-## provides data for visualizer and reset it at the beginning of visualization
-## to synchronize with audio.
-##
-#
-#visualizer_output_name = Visualizer feed
-#
-##
-## If you set format to 44100:16:2, make it 'yes'.
-##
-#visualizer_in_stereo = yes
-#
-##
-## Note: set below to >=10 only if you have synchronization issues with
-## visualization and audio.
-##
-#
-#visualizer_sync_interval = 0
-#
-##
-## Note: To enable spectrum frequency visualization you need to compile ncmpcpp
-## with fftw3 support.
-##
-#
-## Available values: spectrum, wave, wave_filled, ellipse.
-##
-#visualizer_type = spectrum
-#
-#visualizer_fps = 60
-#
-#visualizer_autoscale = no
-#
-#visualizer_look = ●▮
-#
-#visualizer_color = blue, cyan, green, yellow, magenta, red
-#
-## Alternative subset of 256 colors for terminals that support it.
-##
-#visualizer_color = 47, 83, 119, 155, 191, 227, 221, 215, 209, 203, 197, 161
-#
-##
-## Note: The next few visualization options apply to the spectrum visualizer.
-##
-#
-## Use unicode block characters for a smoother, more continuous look.
-## This will override the visualizer_look option. With transparent terminals
-## and visualizer_in_stereo set, artifacts may be visible on the bottom half of
-## the visualization.
-#
-#visualizer_spectrum_smooth_look = yes
-#
-## A value between 1 and 5 inclusive. Specifying a larger value makes the
-## visualizer look at a larger slice of time, which results in less jumpy
-## visualizer output.
-#
-#visualizer_spectrum_dft_size = 2
-#
-#visualizer_spectrum_gain = 10
-#
-## Left-most frequency of visualizer in Hz, must be less than HZ MAX
-#
-#visualizer_spectrum_hz_min = 20
-#
-## Right-most frequency of visualizer in Hz, must be greater than HZ MIN
-#
-#visualizer_spectrum_hz_max = 20000
-#
-##### system encoding #####
-##
-## ncmpcpp should detect your charset encoding but if it failed to do so, you
-## can specify charset encoding you are using here.
-##
-## Note: You can see whether your ncmpcpp build supports charset detection by
-## checking output of `ncmpcpp --version`.
-##
-## Note: Since MPD uses UTF-8 by default, setting this option makes sense only
-## if your encoding is different.
-##
-#
-#system_encoding = ""
-#
-##### delays #####
-#
-## Time of inactivity (in seconds) after playlist highlighting will be disabled
-## (0 = always on).
-##
-#playlist_disable_highlight_delay = 5
-#
-## Defines how long messages are supposed to be visible.
-##
-#message_delay_time = 5
-#
-##### song format #####
-##
-## For a song format you can use:
-##
-## %l - length
-## %f - filename
-## %D - directory
-## %a - artist
-## %A - album artist
-## %t - title
-## %b - album
-## %y - date
-## %n - track number (01/12 -> 01)
-## %N - full track info (01/12 -> 01/12)
-## %g - genre
-## %c - composer
-## %p - performer
-## %d - disc
-## %C - comment
-## %P - priority
-## $R - begin right alignment
-##
-## If you want to make sure that a part of the format is displayed only when
-## certain tags are present, you can archieve it by grouping them with brackets,
-## e.g. '{%a - %t}' will be evaluated to 'ARTIST - TITLE' if both tags are
-## present or '' otherwise.  It is also possible to define a list of
-## alternatives by providing several groups and separating them with '|',
-## e.g. '{%t}|{%f}' will be evaluated to 'TITLE' or 'FILENAME' if the former is
-## not present.
-##
-## Note: If you want to set limit on maximal length of a tag, just put the
-## appropriate number between % and character that defines tag type, e.g. to
-## make album take max. 20 terminal cells, use '%20b'.
-##
-## In addition, formats support markers used for text attributes.  They are
-## followed by character '$'. After that you can put:
-##
 ## - 0 - default window color (discards all other colors)
 ## - 1 - black
 ## - 2 - red
@@ -211,388 +9,63 @@
 ## - 7 - cyan
 ## - 8 - white
 ## - 9 - end of current color
-## - b - bold text
+###
-## - u - underline text
+
-## - r - reverse colors
+visualizer_in_stereo = yes
-## - a - use alternative character set
+#visualizer_sample_multiplier = 1
-##
+#visualizer_sync_interval = 30
-## If you don't want to use a non-color attribute anymore, just put it again,
+
-## but this time insert character '/' between '$' and attribute character,
+## Available values: spectrum, wave.
-## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename with
+visualizer_type = spectrum
-## reversed colors.
+visualizer_look = ●▊
-##
+
-## If you want to use 256 colors and/or background colors in formats (the naming
+#song_columns_list_format = (20)[]{a} (50)[]{tr} (6f)[]{NE}
-## scheme is described below in section about color definitions), it can be done
+#song_columns_list_format = (7f)[]{NEr} (20)[]{a} (80)[white]{tr} (6f)[]{l}
-## with the syntax $(COLOR), e.g. to set the artist tag to one of the
+
-## non-standard colors and make it have yellow background, you need to write
+# Playlist look
-## $(197_yellow)%a$(end). Note that for standard colors this is interchangable
+playlist_display_mode = "classic"
-## with attributes listed above.
+song_list_format = " {%a}|{%A} - %t "
-##
+
-## Note: colors can be nested.
+now_playing_prefix = "$8"
-##
+now_playing_suffix = "$9"
-#
+
-#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3%l$9}
+selected_item_prefix = "$4"
-#
+selected_item_suffix = "$9"
-#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
+
-#
-#song_library_format = {%n - }{%t}|{%f}
-#
-#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
-#
-#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
-#
-#current_item_prefix = $(yellow)$r
-#
-#current_item_suffix = $/r$(end)
-#
-#current_item_inactive_column_prefix = $(white)$r
-#
-#current_item_inactive_column_suffix = $/r$(end)
-#
-#now_playing_prefix = $b
-#
-#now_playing_suffix = $/b
-#
-#browser_playlist_prefix = "$2playlist$9 "
-#
-#selected_item_prefix = $6
-#
-#selected_item_suffix = $9
-#
-#modified_item_prefix = $3> $9
-#
-##
-## Note: attributes are not supported for the following variables.
-##
-#song_window_title_format = {%a - }{%t}|{%f}
-##
-## Note: Below variables are used for sorting songs in browser.  The sort mode
-## determines how songs are sorted, and can be used in combination with a sort
-## format to specify a custom sorting format.  Available values for
-## browser_sort_mode are "type", "name", "mtime", "format" and "none".
-##
-#
-#browser_sort_mode = type
-#
-#browser_sort_format = {%a - }{%t}|{%f} {%l}
-#
-##### columns settings #####
-##
-## syntax of song columns list format is "column column etc."
-##
-## - syntax for each column is:
-##
-## (width of the column)[color of the column]{displayed tag}
-##
-## Note: Width is by default in %, if you want a column to have fixed size, add
-## 'f' after the value, e.g. (10)[white]{a} will be the column that take 10% of
-## screen (so the real width will depend on actual screen size), whereas
-## (10f)[white]{a} will take 10 terminal cells, no matter how wide the screen
-## is.
-##
-## - color is optional (if you want the default one, leave the field empty).
-##
-## Note: You can give a column additional attributes by putting appropriate
-## character after displayed tag character. Available attributes are:
-##
-## - r - column will be right aligned
-## - E - if tag is empty, empty tag marker won't be displayed
-##
-## You can also:
-##
-## - give a column custom name by putting it after attributes, separated with
-##   character ':', e.g. {lr:Length} gives you right aligned column of lengths
-##   named "Length".
-##
-## - define sequence of tags, that have to be displayed in case predecessor is
-##   empty in a way similar to the one in classic song format, i.e. using '|'
-##   character, e.g. {a|c|p:Owner} creates column named "Owner" that tries to
-##   display artist tag and then composer and performer if previous ones are not
-##   available.
-##
-#
-#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
-#
-##### various settings #####
-#
-##
-## Note: Custom command that will be executed each time song changes. Useful for
-## notifications etc.
-##
-#execute_on_song_change = ""
-#
-##
-## Note: Custom command that will be executed each time player state
-## changes. The environment variable MPD_PLAYER_STATE is set to the current
-## state (either unknown, play, pause, or stop) for its duration.
-##
-#
-#execute_on_player_state_change = ""
-#
-#playlist_show_mpd_host = no
-#
-#playlist_show_remaining_time = no
-#
-#playlist_shorten_total_times = no
-#
 #playlist_separate_albums = no
-#
+
-##
+progressbar_look = "▰▱ "
-## Note: Possible display modes: classic, columns.
+#progressbar_boldness = yes
-##
+
-#playlist_display_mode = columns
+header_visibility = no
-#
+statusbar_visibility = yes
-#browser_display_mode = classic
+titles_visibility = no
-#
+
-#search_engine_display_mode = classic
-#
-#playlist_editor_display_mode = classic
-#
-#discard_colors_if_item_is_selected = yes
-#
-#show_duplicate_tags = yes
-#
-#incremental_seeking = yes
-#
-#seek_time = 1
-#
-#volume_change_step = 2
-#
-#autocenter_mode = no
-#
-#centered_cursor = no
-#
-##
-## Note: You can specify third character which will be used to build 'empty'
-## part of progressbar.
-##
-#progressbar_look = =>
-#
-## Available values: database, playlist.
-##
-#default_place_to_search_in = database
-#
-## Available values: classic, alternative.
-##
-user_interface = alternative
-#
-#data_fetching_delay = yes
-#
-## Available values: artist, album_artist, date, genre, composer, performer.
-##
-#media_library_primary_tag = artist
-#
-#media_library_albums_split_by_date = yes
-#
-#media_library_hide_album_dates = no
-#
-## Available values: wrapped, normal.
-##
-#default_find_mode = wrapped
-#
-#default_tag_editor_pattern = %n - %t
-#
-#header_visibility = yes
-#
-#statusbar_visibility = yes
-#
-## Show the "Connected to ..." message on startup
-#connected_message_on_startup = yes
-#
-#titles_visibility = yes
-#
-#header_text_scrolling = yes
-#
-#cyclic_scrolling = no
-#
-#lyrics_fetchers = azlyrics, genius, musixmatch, sing365, metrolyrics, justsomelyrics, jahlyrics, plyrics, tekstowo, zeneszoveg, internet
-#
-#follow_now_playing_lyrics = no
-#
-#fetch_lyrics_for_current_song_in_background = no
-#
-#store_lyrics_in_song_dir = no
-#
-#generate_win32_compatible_filenames = yes
-#
-#allow_for_physical_item_deletion = no
-#
-##
-## Note: If you set this variable, ncmpcpp will try to get info from last.fm in
-## language you set and if it fails, it will fall back to english. Otherwise it
-## will use english the first time.
-##
-## Note: Language has to be expressed as an ISO 639 alpha-2 code.
-##
-#lastfm_preferred_language = en
-#
-#space_add_mode = add_remove
-#
-#show_hidden_files_in_local_browser = no
-#
-##
-## How shall screen switcher work?
-##
-## - "previous" - switch between the current and previous screen.
-## - "screen1,...,screenN" - switch between given sequence of screens.
-##
 ## Screens available for use: help, playlist, browser, search_engine,                                                                                          
-## media_library, playlist_editor, tag_editor, outputs, visualizer, clock,
+## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.                                                                                     
-## lyrics, last_fm.
+startup_screen = playlist
-##
+
-#screen_switcher_mode = playlist, browser
+mouse_support = no
-#
+external_editor = vim
-##
+use_console_editor = yes
-## Note: You can define startup screen by choosing screen from the list above.
+
-##
-#startup_screen = playlist
-#
-##
-## Note: You can define startup slave screen by choosing screen from the list
-## above or an empty value for no slave screen.
-##
-#startup_slave_screen = ""
-#
-#startup_slave_screen_focus = no
-#
-##
-## Default width of locked screen (in %).  Acceptable values are from 20 to 80.
-##
-#
-#locked_screen_width_part = 50
-#
-#ask_for_locked_screen_width_part = yes
-#
-#jump_to_now_playing_song_at_start = yes
-#
-#ask_before_clearing_playlists = yes
-#
-#clock_display_seconds = no
-#
-#display_volume_level = yes
-#
-#display_bitrate = no
-#
-#display_remaining_time = no
-#
-## Available values: none, basic, extended, perl.
-##
-#regular_expressions = perl
-#
-##
-## Note: if below is enabled, ncmpcpp will ignore leading "The" word while
-## sorting items in browser, tags in media library, etc.
-##
-#ignore_leading_the = no
-#
-##
-## Note: if below is enabled, ncmpcpp will ignore diacritics while searching and
-## filtering lists. This takes an effect only if boost was compiled with ICU
-## support.
-##
-#ignore_diacritics = no
-#
-#block_search_constraints_change_if_items_found = yes
-#
-#mouse_support = yes
-#
-#mouse_list_scroll_whole_page = no
-#
-#lines_scrolled = 5
-#
-#empty_tag_marker = <empty>
-#
-#tags_separator = " | "
-#
-#tag_editor_extended_numeration = no
-#
-#media_library_sort_by_mtime = no
-#
-#enable_window_title = yes
-#
-##
-## Note: You can choose default search mode for search engine. Available modes
-## are:
-##
-## - 1 - use mpd built-in searching (no regexes, pattern matching)
-##
-## - 2 - use ncmpcpp searching (pattern matching with support for regexes, but
-##       if your mpd is on a remote machine, downloading big database to process
-##       it can take a while
-##
-## - 3 - match only exact values (this mode uses mpd function for searching in
-##       database and local one for searching in current playlist)
-##
-#
-#search_engine_default_search_mode = 1
-#
-#external_editor = nano
-#
-## Note: set to yes if external editor is a console application.
-##
-#use_console_editor = yes
-#
 ##### colors definitions #####
-##
+colors_enabled = yes
-## It is possible to set a background color by setting a color value
+empty_tag_color = cyan
-## "<foreground>_<background>", e.g. red_black will set foregound color to red
+header_window_color = default
-## and background color to black.
+volume_color = default
-##
+state_line_color = default
-## In addition, for terminals that support 256 colors it is possible to set one
+state_flags_color = default
-## of them by using a number in range [1, 256] instead of color name,
+main_window_color = default
-## e.g. numerical value corresponding to red_black is 2_1. To find out if the
+color1 = white
-## terminal supports 256 colors, run ncmpcpp and check out the bottom of the
+color2 = green
-## help screen for list of available colors and their numerical values.
+current_item_prefix = "$(white)$r"
-##
+current_item_suffix = "$/r$(end)"
-## What is more, there are two special values for the background color:
+progressbar_color = black
-## "transparent" and "current". The first one explicitly sets the background to
+progressbar_elapsed_color = default
-## be transparent, while the second one allows you to preserve current
+statusbar_color = default
-## background color and change only the foreground one. It's used implicitly
+alternative_ui_separator_color = black
-## when background color is not specified.
+#active_column_color = red
-##
+visualizer_color = blue
-## Moreover, it is possible to attach format information to selected color
+window_border_color = green
-## variables by appending to their end a colon followed by one or more format
-## flags, e.g. black:b or red:ur. The following variables support this syntax:
-## visualizer_color, color1, color2, empty_tag_color, volume_color,
-## state_line_color, state_flags_color, progressbar_color,
-## progressbar_elapsed_color, player_state_color, statusbar_time_color,
-## alternative_ui_separator_color.
-##
-## Note: due to technical limitations of older ncurses version, if 256 colors
-## are used there is a possibility that you'll be able to use only colors with
-## transparent background.
-#
-#colors_enabled = yes
-#
-#empty_tag_color = cyan
-#
-#header_window_color = default
-#
-#volume_color = default
-#
-#state_line_color = default
-#
-#state_flags_color = default:b
-#
-#main_window_color = yellow
-#
-#color1 = white
-#
-#color2 = green
-#
-#progressbar_color = black:b
-#
-#progressbar_elapsed_color = green:b
-#
-#statusbar_color = default
-#
-#statusbar_time_color = default:b
-#
-#player_state_color = default:b
-#
-#alternative_ui_separator_color = black:b
-#
-#window_border_color = green
-#
 #active_window_border = red
-#