Commit Graph

1594 Commits

Author SHA1 Message Date
Quentin Rameau
9fdef90feb ls: add -f and -S options 2015-03-19 10:12:12 +00:00
Quentin Rameau
787d99d896 nl: add -d -p -f -h options 2015-03-19 10:10:55 +00:00
FRIGN
3111908b03 Refactor recurse() again
Okay, why yet another recurse()-refactor?
The last one added the recursor-struct, which simplified things
on the user-end, but there was still one thing that bugged me a lot:
Previously, all fn()'s were forced to (l)stat the paths themselves.
This does not work well when you try to keep up with H-, L- and P-
flags at the same time, as each utility-function would have to set
the right function-pointer for (l)stat every single time.

This is not desirable. Furthermore, recurse should be easy to use
and not involve trouble finding the right (l)stat-function to do it
right.
So, what we needed was a stat-argument for each fn(), so it is
directly accessible. This was impossible to do though when the
fn()'s are still directly called by the programs to "start" the
recurse.
Thus, the fundamental change is to make recurse() the function to
go, while designing the fn()'s in a way they can "live" with st
being NULL (we don't want a null-pointer-deref).

What you can see in this commit is the result of this work. Why
all this trouble instead of using nftw?
The special thing about recurse() is that you tell the function
when to recurse() in your fn(). You don't need special flags to
tell nftw() to skip the subtree, just to give an example.

The only single downside to this is that now, you are not allowed
to unconditionally call recurse() from your fn(). It has to be
a directory.
However, that is a cost I think is easily weighed up by the
advantages.

Another thing is the history: I added a procedure at the end of
the outmost recurse to free the history. This way we don't leak
memory.

A simple optimization on the side:

-		if (h->dev == st.st_dev && h->ino == st.st_ino)
+		if (h->ino == st.st_ino && h->dev == st.st_dev)

First compare the likely difference in inode-numbers instead of
checking the unlikely condition that the device-numbers are
different.
2015-03-19 01:08:19 +01:00
FRIGN
b3e8b17235 Audit concat() in libutil
Be more pedantic about the error-checking, fread can also return
values > 0 even though there has been a read-error.
We want to write the last incoming data and then bail.
2015-03-18 22:58:42 +01:00
FRIGN
a68c2a9e6e Remove apathmax() and implicitly agetcwd()
pathconf() is just an insane interface to use. All sane operating-
systems set sane values for PATH_MAX. Due to the by-runtime-nature of
pathconf(), it actually weakens the programs depending on its values.

Given over 3 years it has still not been possible to implement a sane
and easy to use apathmax()-utility-function, and after discussing this
on IRC, we'll dump this garbage.

We are careful enough not to overflow PATH_MAX and even if, any user
is able to set another limit in config.mk if he so desires.
2015-03-18 15:20:35 +01:00
FRIGN
833670e06c Add notice on flags put in parentheses in README 2015-03-18 01:11:55 +01:00
FRIGN
2602681232 ls has explicit UTF-8-support (q-flag) 2015-03-18 01:10:47 +01:00
FRIGN
74dcd46c70 Update README in regard to ls(1)
I marked out -m, -s and -x, because they are either visual flags
for interactive mode, which are better solved with tools made for this
job, or superfluous in another sense.
For example, -s basically "steals" the job from du.
In general, some of these options might still be easy to implement.
The options -S and -f are important though, as they are sorting-options
with real use.
2015-03-18 01:00:13 +01:00
FRIGN
7bacd98b0e Audit wc(1)
Style cleanup, Manpage refactoring.
2015-03-18 00:20:19 +01:00
FRIGN
960bccbe9d Remove comma from uuencode.1 2015-03-18 00:18:28 +01:00
FRIGN
a20a9350db Audit uuencode(1)
Style cleanup, Manpage refactoring.
2015-03-18 00:14:56 +01:00
FRIGN
1b71559431 Audit uudecode(1)
Style cleanup, Manpage refactoring.
2015-03-18 00:10:36 +01:00
FRIGN
4af8889396 Audit uniq(1)
Refactor the manpage and small style-changes in uniq.c.
Remove unnecessary "else", we catch argc > 2 earlier already.
2015-03-17 23:59:09 +01:00
FRIGN
5af4cdcd60 Audit unexpand(1)
I checked the algorithm already a while ago. What was left was a
couple of style-fixes.
2015-03-17 23:45:03 +01:00
FRIGN
f6dc69eca3 Audit tr(1)
A tool of my own devising, except from a small style-fix this code
has already been triple-checked.
2015-03-17 23:41:22 +01:00
FRIGN
95fb7364a8 Audit touch(1)
Only minor things, as I already worked heavily on this tool a while
ago.
Fix style in the main loop and wording in the manpage.
2015-03-17 23:38:09 +01:00
FRIGN
99ded174b2 Audit test(1)
Only add empty lines before returns, everything else is ok.
Also add the STANDARDS-section to the manpage, which was only
present as a heading until now.
2015-03-17 23:35:11 +01:00
FRIGN
6372a8f227 Audit tail(1)
1) Specify default in manpage under flag.
2) Boolean and return value style fixes.
3) argv-argc-centric loop.
4) No need to check for argc == 1 before the fflag-subroutine.
5) Remove indentation.
6) Empty line before return.
2015-03-17 23:24:43 +01:00
FRIGN
3c5d0ce4ca Mark sync(1) as audited
Nothing to be done here.
2015-03-17 23:07:41 +01:00
FRIGN
32b9d76747 Audit strings(1)
Only smaller style-changes. I already refactored the underlying
logic a while ago.
2015-03-17 23:05:50 +01:00
FRIGN
3725d501b3 Audit split(1)
1) Refactor manpage, add STANDARDS section.
2) Boolean-style-changes.
3) Update usage, reflecting num-idiom also changed in the manpage.
4) Refactor error messages.
5) Also fclose stdin.
6) Empty line before return.
2015-03-17 22:59:48 +01:00
FRIGN
4d946a274f Audit renice(1)
1) Get rid of strtop(), which was a NiH-version of estrtonum().
2) Boolean-style-fixes.
3) Update usage, reflecting num-idiom, also update manpage accordingly.
4) Don't break after usage().
5) Rewrite main loop with *argv instead of argv[i].
6) Don't play around with who < 0 and stuff.
7) Rename status to ret for consistency.
2015-03-17 22:15:09 +01:00
FRIGN
c7deb4f2b7 Audit printf(1)
Not a lot to do here, I wrote this less than a month ago. The only
thing I missed was the newline before return.
2015-03-17 21:43:01 +01:00
FRIGN
1bc002b44a Audit paste(1)
Well, basically there was not a lot to do, as I already (fortunately)
audited this code a while back.
There were only minor style-changes.
2015-03-17 21:34:38 +01:00
Evan Gates
cf5114a133 untypedef expr, find, test, as is existing style in sbase 2015-03-17 20:04:26 +00:00
FRIGN
93fd817536 Add estrlcat() and estrlcpy()
It has become a common idiom in sbase to check strlcat() and strlcpy()
using

if (strl{cat, cpy}(dst, src, siz) >= siz)
        eprintf("path too long\n");

However, this was not carried out consistently and to this very day,
some tools employed unchecked calls to these functions, effectively
allowing silent truncations to happen, which in turn may lead to
security issues.
To finally put an end to this, the e*-functions detect truncation
automatically and the caller can lean back and enjoy coding without
trouble. :)
2015-03-17 11:24:49 +01:00
FRIGN
a76d4943b5 Audit mktemp(1)
1) Unglobalize variables.
2) Sort local variables.
3) Use return instead of exit() in main().
4) Add empty line before return.
2015-03-17 11:01:33 +01:00
FRIGN
683d108387 Audit logname(1)
1) Add usage().
2) Idiomatic argv0-setter. We don't use arg.h, as we do not process
   flags or arguments.
3) Remove program-name from eprintf-call. This is done in the eprintf-
   function itself when the DEBUG-define is set.
   We'll activate it by default later.
4) Add empty line before return.
2015-03-17 00:44:18 +01:00
FRIGN
fbda47b964 Rewrite foldline() in fold(1)
After the audit, I had this noted down as a TODO-item, but
considered the function to be tested enough to hold the line
until I came to rewrite it.
Admittedly, I didn't take a closer look at the previous loop
and there probably were some edge-cases which caused trouble, but
so far so good, the new version of this commit should be safe
and considered audited.
2015-03-16 19:26:42 +01:00
FRIGN
64da0d1ebc Audit kill(1)
1) Refactor the manpage with num-options, optimize wording to be more
   concise and to the point, pid also specifies process groups.
2) Make int sig const.
3) Remove prototypes.
4) /* not reached */ consistency.
5) Refactor usage() with eprintf.
6) Refactor arg-parser with a switch, use estrtonum
7) Use return instead of exit() in main()
8) argc-argv-correctness.
2015-03-16 12:37:46 +01:00
FRIGN
ac01240800 Small style-fix in cat.c 2015-03-16 10:36:36 +01:00
sin
f919f2f2a4 test: Fix -e, -r, -w and -x
We return 0 when the expression evaluates to true.  access() returns
0 on a successful call so check against that.
2015-03-13 23:44:18 +00:00
FRIGN
0f60227ea8 Remove judging word from head.1 and tail.1 as well
If it's obsolete, why include it?
No, the point here is that the ARGNUM-syntax has it's place among
us fellow neckbeards. Let's not degrade it.
2015-03-13 23:54:13 +01:00
FRIGN
942c3613bc Audit fold(1)
1) Use num-wording in the manpage, remove offensive remark against
   the beloved -num-syntax <3.
2) Style changes.
3) Report errors of getline.
4) argv-argc-centric argument loop.
5) Rename r to ret for consistency.
2015-03-13 23:50:09 +01:00
FRIGN
3fa85f0f5e Fix argument parsing in test(1) and chmod(1)
We just take the raw argument list as is. Using arg.h, arguments
beginning with - would have been "eaten up".
Writing a special "bailout" for arg.h was not a good option,
not because it's not impossible (done in 6 LOC), but because it
is a shoehorning around a corner case present for a few programs
which are broken by design by POSIX.
2015-03-13 23:50:09 +01:00
Evan Gates
ad6da18ca6 increment pointer by runelen(delim) not 1 2015-03-13 13:42:03 +00:00
FRIGN
c82425e128 Three bugfixes in mkdir(1)
1) Any path passed to mkdir -p beginning with '/' failed, because
   it would cut out the first '/' immediately, passing "" to mkdir.
2) Running mkdir -p with a path/to/dir without trailing '/' would
   not create the directory.
   This is due to a wrong flag-check I added in the main-loop.
   It should now work as expected.
3) With the p-flag given, don't report an error in case the last
   dir also exists.
2015-03-13 12:23:22 +01:00
FRIGN
b12041365d Audit expand(1)
Not much to do here. Forgot a colon in the manpage and some style-
changes in the code.
2015-03-13 00:38:29 +01:00
FRIGN
9fd4a745f8 Add history and config-struct to recurse
For loop detection, a history is mandatory. In the process of also
adding a flexible struct to recurse, the recurse-definition was moved
to fs.h.
The motivation behind the struct is to allow easy extensions to the
recurse-function without having to change the prototypes of all
functions in the process.
Adding flags is really simple as well now.

Using the recursor-struct, it's also easier to see which defaults
apply to a program (for instance, which type of follow, ...).

Another change was to add proper stat-lstat-usage in recurse. It
was wrong before.
2015-03-13 00:29:48 +01:00
FRIGN
3b187f4826 Only call recurse() when path points to a directory in du(1)
This improves performance by ~30%.
2015-03-12 13:29:12 +01:00
FRIGN
af61ba738c Refactor recurse()
Instead of allocating a buffer on each run, build a buf on the stack.
2015-03-12 13:22:37 +01:00
FRIGN
c4e0080bbf Mark du(1) as audited in README 2015-03-11 23:31:26 +01:00
FRIGN
01de5df8e6 Audit du(1) and refactor recurse()
While auditing du(1) I realized that there's no way the over 100 lines
of procedures in du() would pass the audit.
Instead, I decided to rewrite this section using recurse() from libutil.
However, the issue was that you'd need some kind of payload to count
the number of bytes in the subdirectories and use them in the higher
hierarchies.
The solution is to add a "void *data" data pointer to each recurse-
function-prototype, which we might also be able to use in other
recurse-applications.
recurse() itself had to be augmented with a recurse_samedev-flag, which
basically prevents recurse from leaving the current device.

Now, let's take a closer look at the audit:
1) Removing the now unnecessary util-functions push, pop, xrealpath,
   rename print() to printpath(), localize some global variables.
2) Only pass the block count to nblks instead of the entire stat-
   pointer.
3) Fix estrtonum to use the minimum of LLONG_MAX and SIZE_MAX.
4) Use idiomatic argv+argc-loop
5) Report proper exit-status.
2015-03-11 23:21:52 +01:00
FRIGN
00ca97b279 Mark cut(1) and cron(1) as audited in README
I finished auditing cut(1) a few minutes ago, and cron(1) is an
upstream project which needs to be taken care of upstream (sin's call).
2015-03-11 17:33:08 +01:00
FRIGN
c9de9dd3c2 Audit cut(1)
1) Add check to parselist() to warn about an empty list.
2) Remove all "cut: "-prefixes from error-messages and other style
   changes.
3) != -1 --> >= 0 and check for ferror on fp after getline.
4) Update usage with argv0.
5) argv-centric loop refactor
6) Properly report exit-status.
7) Add empty line before return.
2015-03-11 17:29:18 +01:00
FRIGN
011c81b21b Undef reallocarray in util.h before declaration
In case we link against the OpenBSD-libc, we want to avoid collisions.
2015-03-11 17:06:52 +01:00
FRIGN
f1a1b7f994 Mark comm(1) as audited in README 2015-03-11 13:47:33 +01:00
FRIGN
a4587b84f8 Audit comm(1)
1) Use the LIMIT()-macro in util.h instead of defining our own.
2) Drop nextline() and finish(), not needed anymore. Use
   fputs in printline instead of printf.
   --> BUGFIX: Finish exited with status 1, but actually should
               exit with status 0 if ferror(f) == 0.
3) Don't use /dev/fd/0 and use idiomatic <stdin> and fp = stdin
   instead.
4) Refactor loop to use getline() instead of some handrolled
   nextline-function.
   --> BUGFIX: Line-length was limited to LINE_MAX before, now
               it's factually unlimited.
5) Combine diff >= 0 and diff <= 0 into one loop with a beginning
   continue-condition (diff && i == (diff < 0)).
6) BUGFIX: If diff == 0, don't print one buffer after EOFing on the
           other.
2015-03-11 13:47:08 +01:00
sin
76ea3fdd52 cksum: Report exit status properly 2015-03-11 12:35:29 +00:00
FRIGN
e11717ab3b Print usage() when -l and -s are both given in cmp(1)
This is unspecified behaviour, not undefined by POSIX. So we
break out here.
2015-03-11 13:31:08 +01:00