Previously, with -p, the specified directory and all of its parents
would be 0777&~filemask (regardless of the -m flag). POSIX says parent
directories must created as (0300|~filemask)&0777, and of course if -m
is set, the specified directory should be created with those
permissions.
Additionally, POSIX says that for symbolic_mode strings, + and - should
be interpretted relative to a default mode of 0777 (not 0).
Without -p, previously the directory would be created first with
0777&~filemask (before a chmod), but POSIX says that the directory shall
at no point in time have permissions less restrictive than the -m mode
argument.
Rather than dealing with mkdir removing the filemask bits by calling
chmod afterward, just clear the umask and remove the bits manually.
In the description of 3111908b03, it says
that the functions must be able to handle st being NULL, but recurse
always passes a valid pointer. The only function that was ever passed
NULL was rm(), but this was changed to go through recurse in
2f4ab52739, so now the checks are
pointless.
by re-ordering when chmod/chown is done, only a list of directories (not
all files) need be kept for fixing mtime.
this also fixes an issue where set-user-id files in a tar may not work. chmod
is done before chown and before the file is written. if ownership changes, or
the file is being written as a normal user, the setuid bit would be cleared.
also fixes ownership of symbolic links. previously a chown() was called,
which would change the ownership of the link target. lchown() is now
used for symbolic links.
renamed all ent, ent* functions to dir* as it better describes what they
do.
use timespec/utimensat instead of timeval/utimes to get AT_SYMLINK_NOFOLLOW
Rely on what the system provides. These are not standardized macros
but any relevant UNIX system will provide them.
We can revisit this in the future if something breaks.
When we selectively process entries from the archive, ensure that
we jump over the data section of each uninteresting entry before going
on to process the next entry. Not doing so, leaves the file stream
pointer in the wrong place.
This particular change does not have any immediate shortcomings.
We still print a warning to alert the user.
Exiting on a chown() failure caused problems when untarring
inside a restricted user namespace on Linux where the uid/gid
mappings were limited.
Not all archives are packed in such way to be generated without
having to recursively generate the output path.
For now, reuse the function from mkdir.c and later move it to
libutil.
Numeric fields can be <space> terminated. Ensure those are
patched with NULs so we can perform string operations.
There is more work to be done in this area, namely some fields like
name, linkname and prefix are not always null-terminated.
This has been a known issue for a long time. Example:
printf "word" > /dev/full
wouldn't report there's not enough space on the device.
This is due to the fact that every libc has internal buffers
for stdout which store fragments of written data until they reach
a certain size or on some callback to flush them all at once to the
kernel.
You can force the libc to flush them with fflush(). In case flushing
fails, you can check the return value of fflush() and report an error.
However, previously, sbase didn't have such checks and without fflush(),
the libc silently flushes the buffers on exit without checking the errors.
No offense, but there's no way for the libc to report errors in the exit-
condition.
GNU coreutils solve this by having onexit-callbacks to handle the flushing
and report issues, but they have obvious deficiencies.
After long discussions on IRC, we came to the conclusion that checking the
return value of every io-function would be a bit too much, and having a
general-purpose fclose-wrapper would be the best way to go.
It turned out that fclose() alone is not enough to detect errors. The right
way to do it is to fflush() + check ferror on the fp and then to a fclose().
This is what fshut does and that's how it's done before each return.
The return value is obviously affected, reporting an error in case a flush
or close failed, but also when reading failed for some reason, the error-
state is caught.
the !!( ... + ...) construction is used to call all functions inside the
brackets and not "terminating" on the first.
We want errors to be reported, but there's no reason to stop flushing buffers
when one other file buffer has issues.
Obviously, functionales come before the flush and ret-logic comes after to
prevent early exits as well without reporting warnings if there are any.
One more advantage of fshut() is that it is even able to report errors
on obscure NFS-setups which the other coreutils are unable to detect,
because they only check the return-value of fflush() and fclose(),
not ferror() as well.
We only allow decompression for extraction. Thus, it may be confusing
for the user and break scripts silently when the j- or z-flag are given
even though this is not supported.
I've been wanting to do this for a while now, as tar(1) used to
be one of messiest and cruftiest tools.
First off, before walking through the audit, I'll talk about
what the DIRFIRST-flag for recurse() does.
It basically calls fn() on the first-level-dir before calling
it's subentries. It's necessary here, because else the order
of the tar-files would've been wrong (it would try to create
dir/file before creating dir/).
Now, to the audit:
1) Update manpage, fix mistake that compression is also available
for compressing. It's only available for extracting.
2) Define the major, minor and makedev macros from glibc by ourselves.
No need to rely on them, as they are common sense.
decomp()
3) Simple refactorization.
putoctal()
4) Add a truncation check for snprintf().
archive()
5) BUGFIX: Add checks to any checkable function, don't blindly call
them, this is harmful and there are 100 ways to exploit that.
6) Use estrlcpy() instead of snprintf() wherever possible, fix
alignment.
7) BUGFIX: Terminate the result-buffer of readlink(), check if
it even succeeded.
8) Fix sizeof()-formatting.
unarchive()
9) BUGFIX: Add checks to any checkable function, don't blindly call
them, this is harmful and there are 100 ways to exploit that.
10) BUGFIX: strtoul can happily return negative numbers. Add checks
for that and also if the full string has been processed.
11) Remove calls to perror(). We have eprintf, use it.
12) BUGFIX: "minor = strtoul(h->mode, 0, 8);". We need h->minor of
course.
13) Fix typo "usupported", remove fprintf-call.
print()
14) Check fread().
xt()
15) Get rid of snprintf-magic. Use estrlcat().
16) BUGFIX: check for ferror() on the tarfile.
usage()
17) Update it. The old usage() was like 1000 years old.
main()
18) Add DIRFIRST-flag to the recursor.
19) Don't print usage() when a mode is re-set. We allow this in
general.
20) Add function checks and fix error messages.
21) Add tarfilename-global for proper error-messages.
Okay, why yet another recurse()-refactor?
The last one added the recursor-struct, which simplified things
on the user-end, but there was still one thing that bugged me a lot:
Previously, all fn()'s were forced to (l)stat the paths themselves.
This does not work well when you try to keep up with H-, L- and P-
flags at the same time, as each utility-function would have to set
the right function-pointer for (l)stat every single time.
This is not desirable. Furthermore, recurse should be easy to use
and not involve trouble finding the right (l)stat-function to do it
right.
So, what we needed was a stat-argument for each fn(), so it is
directly accessible. This was impossible to do though when the
fn()'s are still directly called by the programs to "start" the
recurse.
Thus, the fundamental change is to make recurse() the function to
go, while designing the fn()'s in a way they can "live" with st
being NULL (we don't want a null-pointer-deref).
What you can see in this commit is the result of this work. Why
all this trouble instead of using nftw?
The special thing about recurse() is that you tell the function
when to recurse() in your fn(). You don't need special flags to
tell nftw() to skip the subtree, just to give an example.
The only single downside to this is that now, you are not allowed
to unconditionally call recurse() from your fn(). It has to be
a directory.
However, that is a cost I think is easily weighed up by the
advantages.
Another thing is the history: I added a procedure at the end of
the outmost recurse to free the history. This way we don't leak
memory.
A simple optimization on the side:
- if (h->dev == st.st_dev && h->ino == st.st_ino)
+ if (h->ino == st.st_ino && h->dev == st.st_dev)
First compare the likely difference in inode-numbers instead of
checking the unlikely condition that the device-numbers are
different.
For loop detection, a history is mandatory. In the process of also
adding a flexible struct to recurse, the recurse-definition was moved
to fs.h.
The motivation behind the struct is to allow easy extensions to the
recurse-function without having to change the prototypes of all
functions in the process.
Adding flags is really simple as well now.
Using the recursor-struct, it's also easier to see which defaults
apply to a program (for instance, which type of follow, ...).
Another change was to add proper stat-lstat-usage in recurse. It
was wrong before.
